mfc-1818打印机墨粉清零(重设MFC-1818打印机墨粉计数的步骤)

Introduction

If you own a Brother MFC-1818 printer, then you might have experienced the issue of printer warning you about low ink level, although the ink cartridge is still half full. This is because the printer uses an ink level monitor system to track the ink levels, and it often gives false alarms. To fix this issue, you can either replace the ink cartridge or reset the ink level counter. In this article, we will guide you through the steps to reset the ink level counter and clear the ink level warning on your MFC-1818 printer.

Step 1: Turn off the Printer

Begin by turning off your Brother MFC-1818 printer and disconnecting it from the power source. It is essential to wait for a minute or two before proceeding to the next step.

Step 2: Enter Maintenance Mode

Press and hold the Menu button on your printer and simultaneously press the Power button. Keep holding both buttons until the screen shows "Maintenance." Once you see "Maintenance" on the screen, release both buttons, and you will enter the maintenance mode.

Step 3: Reset Ink Level Counter

In maintenance mode, the printer will display a series of codes; use the arrow keys to navigate to "80," then press "OK." Now use the arrow keys to navigate to "1," then press "OK." This will reset the ink level counter and clear the ink level warning.

Step 4: Exit Maintenance Mode

After resetting the ink level counter, press the Stop or Exit button several times until the printer displays "Exit Maintenance." Then, press the Power button to turn off your printer. Once the printer is turned off, wait for a few minutes before starting it again.

Step 5: Verify the Ink Level

Now that you have reset the ink level counter, turn on your printer and print a test page to verify if the ink level monitor has been reset. You should not see any ink level warning or low ink message on your printer. If the ink level monitor still shows low ink, then you might need to reset the counter again or replace the ink cartridge.

Conclusion

This concludes our guide on how to reset the ink level counter and clear the ink warning on your Brother MFC-1818 printer. Remember to follow the steps carefully and avoid rushing through the process. Resetting the ink level counter can help you save money on overpriced ink cartridges and allow you to use your printer without any interruption. If you encounter any issues or have any questions, feel free to contact the Brother customer service team for assistance.