兄弟9140定影单元清零重置(Brother 9140 Imaging Unit Reset and Clear Instructions)

Brother 9140 Imaging Unit Reset and Clear Instructions

If you own a Brother 9140 printer, you may have reached a point where you need to reset or clear the imaging unit. This process is important for maintaining the quality of your printer and ensuring that it functions properly. In this guide, we’ll walk you through the steps you need to take to perform a Brother 9140 imaging unit reset and clear.

Step 1: Turn off the Printer

The first step in resetting or clearing the imaging unit of your Brother 9140 printer is to turn it off. Ensure that the printer is completely switched off and unplugged from the power source before you proceed to the next step.

Step 2: Open the Printer Cover

Next, you need to open the printer cover. Locate the front cover of the printer and gently pull it towards you to open it.

Step 3: Locate the Imaging Unit

After opening the printer cover, locate the imaging unit. It should be situated at the top of the printer and will be secured in place by two latches. These latches need to be opened before you can remove the imaging unit.

Step 4: Remove the Imaging Unit

Once you have opened the latches securing the imaging unit in place, gently pull the unit towards you. The unit should slide out smoothly and can then be removed from the printer.

Step 5: Clear the Imaging Unit

With the imaging unit removed from the printer, it’s time to clear it. Take a soft, lint-free cloth and gently wipe down the drum and any other components of the imaging unit. This will help remove any accumulated dust or debris on the unit.

Step 6: Reset the Imaging Unit

After clearing the imaging unit, it’s time to reset it. Look for the green lever on the unit – this is the reset lever. Slide the reset lever back and forth seven times to reset the imaging unit.

Step 7: Re-Install the Imaging Unit

Once you have reset the imaging unit, it’s time to re-install it back into the printer. Slide the unit back into place and use the latches to secure it. Ensure that the unit is properly in place before closing the printer cover.

Step 8: Turn on the Printer

After installing the imaging unit, it’s time to turn on the printer. Plug the printer back into the power source and turn it on. Your Brother 9140 printer should now be reset and the imaging unit cleared and ready for use.

Performing a Brother 9140 imaging unit reset and clear is an important part of maintaining your printer and ensuring that it functions properly. By following these simple steps, you can perform this process easily and without any issues.